Multiple Point Diamond Dressers

MULTIPLE POINT DIAMOND DRESSERS are ideally suited for certain specific roughing and finishing operations, depending on the physical characteristics of the grinding wheel, the type of finish desired and the amount of material to be removed. They are not recommended for all dressing operations.

These tools contain fine quality; whole, unbroken diamonds scientifically spaced on the face of the tool, or in evenly spaced meshing layers. While each diamond individually is too small for the average job, more than one diamond contacts the wheel simultaneously, distributing the load and wear evenly.

	MULTIPOINT DRESSERS
	Tool No.	Description – Heavy Duty
	M-3H M-5H M-7H L-15H L-26H	3 stones single layer 5 stones single layer 7 stone single layer 15 stones three layers 26 stones four layers
	7/16" X 1" Shank 5/8" – ¾" Head